MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > Variable Frequency Driver
15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70
15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70
15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70
15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70
Specifications
Brand Name :
Anchorwill
Place of Origin :
China
MOQ :
1
Payment Terms :
L/C, T/T
Packaging Details :
Packing in wooden cases for export
Model Number :
CK70
Certification :
3C
Product name :
Built-In Bypass Soft Starter
Applicable standards :
GB14048.6-2016(IEC947-4-2)
Applicable motor type :
Squirrel-cage three-phase asynchronous motors
Motor power :
11A……1260A(5.5~630kW)
Adjustable start time :
1～120s adjustable
Adjustable stopping time :
0～120s adjustable
control mode :
1.Ramp voltage 2.Ramp current 3.Current limit mode
Protection and monitoring :
Short-circuit, over-voltage, overload, under-voltage, phase loss, over-current, temperature protection
Description

CK70 Built-In Bypass Soft Starter Use DSP Central Processing Unit

Built-In Bypass Soft Starter ​ Overview
CK70 series intelligent soft starter with built-in bypass is a brand-new product optimized and launched on the basis of our CK60 economic soft starter.
Based on the CK60 economic soft starter, the CK70 series is a brand-new product optimized and launched, and its overall performance has been greatly improved to become the preferred product for high-performance drive control of general machinery.
It has become the preferred product for high-performance drive control of general-purpose machinery. The product adopts today's international advanced level of power electronics technology and microprocessor
power electronics technology and microprocessor technology, and adopts high-performance DSP as the central processor to ensure the real-time, superior
It adopts high performance DSP as the central processor to ensure the real-time, superiority and safety of the machine control system. CK70 soft starter is not only suitable for fans, pumps, but also for conveyors.
CK70 soft starter is not only suitable for fans and pumps, but also suitable for conveyor belts, compressors, crushers and other occasions with heavy load and fast response.
CK70 soft starter is not only suitable for fans and pumps, but also suitable for conveyor belt, compressor, crusher and other occasions with heavy load and fast response.
Built-In Bypass Soft Starter Specifications
ITEM Project Description
Applicable standards GB14048.6-2016(IEC947-4-2)
Applicable motor type Squirrel-cage three-phase asynchronous motors
Motor power 11A……1260A(5.5~630kW)
importation Control Voltage AC220V±15%;50Hz/60Hz;AC110V±15%
Rated Voltage AC380V±15%;50Hz/60Hz;660V±15%
Adjustable start time 1～120s adjustable
Adjustable stopping time 0～120s adjustable
control mode 1.Ramp voltage 2.Ramp current 3.Current limit mode
I/0 Logic Inputs 3 channels (X1~X3)
Analog Outputs 1 channel 4~20mA/0~10V
Relay Output 2 relay outputs
Run the command by typing Keyboard display unit setting, control terminal setting
RS485 communication given.
Communication Integrated communication protocols Standard Modbus protocol, 1 channel
Display Unit LCD display Can display current, voltage, alarm and other motor parameters
Protection and monitoring Short-circuit, over-voltage, overload, under-voltage, phase loss, over-current, temperature protection
Indoor, free from direct sunlight, dust, corrosive, flammable gases, oil mist, water vapor, dripping water or salt.
matrix Location Water vapor, dripping water or salt, etc.
altitude Altitude more than 1000m, the capacity should be reduced accordingly, every increase of 100m, the current is reduced by 0.5%.
environmental temperature -10℃~+40℃.
Above 40℃ shall be used with reduced capacity
For every increase of 1℃, the current shall be reduced by 2%.
Temperature Less than 95%RH, no water droplet condensation.
Vibration Less than 5.9m/s2(0.6g)
Storage Temperature -40℃~70℃
framework Protection class Ip20
Cooling method Radiator, natural cooling
Installation Vertical installation in cabinet

Operating environment
The altitude of the installation place is not more than 1000m above sea level; if it is more than 1000m above sea level, it should be used with reduced capacity;
The ambient temperature is -10～40℃, above 40℃, the capacity should be reduced, and the current should be reduced by 2% for every exceeding 1℃.
Ambient humidity ≤95%RH, no water condensation;
●Indoor without corrosive gas that destroys metal and insulating materials;
●No direct sunlight, no dust, flammable gas, oil mist, dripping water or salt.
Product tags

cummins 450kw power genset

,

maintenance genset 50 kva

,

three phase ups 6k
Send your message to this supplier
Send Now

15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70

Ask Latest Price
Product Detail
Brand Name :
Anchorwill
Place of Origin :
China
MOQ :
1
Payment Terms :
L/C, T/T
Packaging Details :
Packing in wooden cases for export
Model Number :
CK70
Contact Supplier
15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70
15kw 132 Kw 160 Kw Built-In Bypass Soft Starter DSP Central Processing Unit CK70

Suzhou ANCHORWILL Technology Co., Ltd.

Verified Supplier
2 Years
jiangsu, suzhou
Since 2008
Business Type :
Manufacturer
Main Products :
Medium And High Voltage Soft Start Cabinet, MG3 Soft Starter, Integrated High Voltage Soft Start Cabinet
Total Annual :
20000000-50000000
Employee Number :
800~1000
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Built-In Bypass Soft Starter
MachineU China Products Electrical Equipment & Supplies Industrial Controls Variable Frequency Driver
Contact Supplier
Submit Requirement